Wednesday, September 24, 2014

To fasten tips to error messages common lens of the camera

Digital cameras are becoming increasingly powerful and intuitive menu structures and larger LCD screens, the user can easily communicate. This means that when the device has a problem, it can display an error message. Unfortunately, most of these errors are almost as clear as the eye through a viewfinder when you forget to remove the lens cap. These tips can help you to do with error messages from the camera lens and will help to solve the problems of the camera lens.

  • Many errors are to falls lens device. If you drop the camera into the extended lens housing, it will lock the box so that it is unable to function properly. Another objective problem can occur if you accidentally press the power button when the device trapped in a pocket or purse in the camera when the lens is not completely out. Careful handling to "help" the aim of the initiative caught using some pressure pulling or pushing on the lens barrel.
  • When the lens is "stuck" and not dropped the camera, be sure to visit the manufacturer's website. Find the support button and find your camera model. The manufacturer's website can be a list of fixes for error, to achieve the specific goal. While you visit the manufacturer's website, all of the software or firmware updates for your phone model image. A change in the software could solve the problem.
  • Remove the battery and memory card for at least 15 minutes. For some devices, this camera will reboot and can clear the error message from the target, as long as something physically broken camera.
  • Refer to your camera manual to see if it provides a manual method "reset" may work best to remove the battery. Manual reset may delete work correctly the error message and the objective lens again.
  • In rare cases, a battery-operated power have difficulty changing the lens. (However, most cameras give a message "Low Battery", long before the battery is too weak to move the lens cover.) Try a cable A / V in the camera, insert before, if the power button, which the LCD will hold, as it starts out, additional housing lens power is pressed.
  • Another trick to try, the error message is the target, press the power button while you press the shutter button to delete. It's a long shot, but it only works occasionally.
  • If you put air into the housing of the lens recently photos in adverse weather conditions such as storms with sand or water, a brush, a microfiber cloth, or some cans to try to remove any debris that may be stuck at home, to avoid make it move.
  • Message "F--" error with an "F" followed by two letters, is often connected to an error message from the lens. This error message indicates that the lens is properly seated in the housing of the digital SLR camera; it is possible that the lens and the camera communicate. Also this error to an adjustment of the opening, not to capture the desired image in the linked camera in the room's lighting conditions. Use an aperture setting. (The error message usually F-- that Nikon cameras are.)
  • Message "E--" error, usually an "E" followed by two numbers, refers to a case "depends" lenses. Try some of the following tips to help it freely to the movement of the lens housing more. (The error message E18 is only with the Canon usually found.)
  • A "target error, restart" error message occurs when starting out can a defective battery or a firmware problem. Use some of the above tips to solve this problem.
  • If you do not solve the problem of the error of the lens, the device has proper repair. If it is a relatively new camera, and I bought an extended warranty, you can repair it for free. If only the manufacturer's warranty, it's worth it to the manufacturer to see if other photographers have the same problem with this model of camera.
  • Finally, I saw a "solution" Internet error lens box camera or the lens with a stuck point and shoot camera. According to this idea, with the camera in the palm of the hand lead a few times, that lens cover removed. Maybe it is a temporary solution, and I would go with a "shake" soft on the camera to the risk of permanent damage start to reduce. I would not recommend this "arrangement" unless everything else has failed that further damage by the possibility. But if you have no other options, it can work.

No comments:

Post a Comment