Troubleshooting Ricoh cameras

You may experience problems with your Ricoh camera from time to time that does not easily lead to a to experience clues to the problem of error messages or other follow. Troubleshooting such problems can be a bit difficult due to the lack of specific information. Follow these tips that you can give to solve with the least effort a better chance of the problem with the Ricoh camera.

• Why noise reduction work? Not have for most Ricoh cameras, noise reduction is not available in all shooting modes, including "shooting" video mode "Sports" scene mode, scene mode and "Portrait". Find manuals for your model for other ways in which noise reduction is guidance available.
• Why not trigger? If the memory card is full or the battery is too low, the trigger will not take a new photo. Or if you, while you accidentally press another button the shutter button, the shutter will not release. Also check to make sure the way is a fashion photo shoot.
• Why the lights go out when the shutter button is pressed • This problem usually occurs when the battery is low, and the device does not have enough power to save a photo. You can also have problems, like a target that does not fit or a zoom function does not work when the battery is low and needs to be recharged see.
• Why are my dark images, even if the flash works? Check the flash range of the Ricoh camera, and make sure that you'll be close enough to the object in the recommended range of the flash when the flash right amount provide light. Also make sure that nothing block the flash. Otherwise, the camera is faulty.
• Why is the LCD display working? If you see a white noise, a white line or a distorted image of the LCD screen, make sure that you have installed the latest firmware for your camera model. Visit to access the support site of Ricoh, the latest firmware.
• Why LCD display to flicker? Probably some kind of interference is causing the flicker. This is often caused by a fluorescent lamp. Be sure to use the Ricoh camera away from fluorescent lights.
• Why stop mode to block a user, please make sure that no stray particles or dirt that could affect the rotation of the wheel. If you do that you clean the area around the dial carefully. It is also possible that the line breaks and the unit needs to be repaired.
• Why are my photos stains on it? First, check the lens for duties or water stains, may affect the image quality. Sometimes when there is a large amount of dust particles in the air, is the flash reflecting particles, eliminating white spots in the pictures. It is also possible for the internal components of the device can be damaged if dropped and Ricoh camera to be repaired.
• Why not the camera will not turn on • Make sure your camera battery is charged and Ricoh is installed correctly. The metal battery terminals must be thoroughly cleaned, or the camera can not draw power from the battery. Use a dry cloth to remove dirt from the contact points of the battery. Make sure that no particles in the battery compartment, which can block the contact. Finally, when the door of the battery compartment is not closed, the Ricoh camera can not be turned on, so be sure to check this area.