The problems are rare with Panasonic Lumix Digital cameras usually. On those occasions when you have a problem, if you seek an error message on the Panasonic camera for some clues on how to solve the problem.
The seven mentioned here should be to resolve the error messages the Panasonic camera.
Error message board memory. If you see this error message with the Panasonic camera, the area of the internal memory is full or damaged. Try to download images from the internal memory. If the error message persists, you may need to format the internal memory area.
Memory card lock memory card error / message. Both error messages are shown together on the memory card instead of the Panasonic camera. If you have an SD memory card, make the protect switch on the side of the card. Slide the switch up to unlock the card. If the error persists, the memory card is damaged and needs to be formatted. It is compatible also possible from the memory card on another device that is not formatted with the file structure of the Panasonic system. Format the card with the Panasonic camera to solve the problem ... but be aware that formatting the card will delete all stored images.
You can not do more error message. If you can "save" image Panasonic camera their "favorites" can find this error message because the camera has a limited number of photos that can be marked as favorites, Rule 999 images. You can not get another as a favorite, to remove the favorite label of one or more photos. This error message can also occur if you try to delete more than 999 images at once.
There is no valid error message. This error message usually means a problem with the memory card. Most of the time this error message when you try to read images from the memory card and the memory card is damaged, empty, broken, or has been formatted on a different camera. To fix the memory card you need to format, but the format of a memory card makes all the photos stored on it is lost. Try to use the memory card on another device or computer and try all the photos stored on it to download before formatting with the Panasonic camera.
Please turn on the camera and then the error message again At least this error message says: ".. Request" The most likely error occurs when one of the parts of the camera equipment is faulty, normally a box-mounted lens. To solve this problem, turn off the camera for a few seconds before it. If this does not resolve the problem, try resetting the device by the battery and the memory card from the camera for at least 10 minutes. Replace the two points, then try operating the unit. If the body of the lens in the lens moves through its zoom range stuck, try to clean the case carefully, remove any debris or dirt. If these steps do not resolve the problem, you probably need a repair for the camera.
This battery can error message. Centre not be used, this error message, you have a battery that is compatible with your Panasonic camera or insert a battery with dirty contacts is used. Clean the metal contacts with a dry cloth carefully. So, make sure that the battery cover is free from dirt. Sometimes you may see this error message when a battery is not used by Panasonic. If the third battery works well to power the camera, you can probably ignore this error message.
This error message is protected. Refer this error message from the Panasonic camera, if the selected image is protected from deletion. Try the camera menus to work to to find a way to remove the protection labels for photo files.
Note that different models of Lumix cameras can provide a different set of error messages shown here. If you see error messages the Panasonic camera is not listed here, check in your camera model Panasonic Lumix manual for a list of other error messages, or visit the area to support the Panasonic website.
Good resolution of the camera and Panasonic developed problems happiness error!
No comments:
Post a Comment